Post by impystud03 on Dec 1, 2003 19:07:57 GMT -5
Okay, lets get a little FAQ going. No SPAM or talking, if you need to talk use PMs...I'll start it out...
1) If your gun shoots every other shot your battery is either low or you need to get a new solenoid.
2) If you are chopping balls drill a couple of holes in the vertical feed to reduce blowback.
3) If the gun is not shooting hard, turn up the velocity or adjust your reg to the right pressure.
4) If, between the first two o-rings on your bolt, the hole goes all the way through, call up JT and tell them you have an old bolt and are requesting a new one. This will also help with the ball chopping problem.
1) If your gun shoots every other shot your battery is either low or you need to get a new solenoid.
2) If you are chopping balls drill a couple of holes in the vertical feed to reduce blowback.
3) If the gun is not shooting hard, turn up the velocity or adjust your reg to the right pressure.
4) If, between the first two o-rings on your bolt, the hole goes all the way through, call up JT and tell them you have an old bolt and are requesting a new one. This will also help with the ball chopping problem.
